Search course
image
Cancel
Teaching & Academics >
Engineering
Video play icon

Power Electronics and Electrical Protection Course Bundle

Master power electronics and electrical protection with this in-depth course. Gain knowledge of Rectifiers, Inverters, AC/DC Converters, Choppers, and more.

19 views
Last updated 4/2024
English

Overview

This magnificent 51-hour course will help you have a kick start in power electronics including rectifiers, AC choppers, DC choppers, and inverters. In addition to the basics of electrical protection, we will also cover topics such as overcurrent protection, differential protection, distance protection, circuit breakers, and fuses.

Throughout the Power Electronics course, you will learn:

  • The applications of power electronics and the definition of a power electronic circuit.
  • Different types of switches such as diodes, thyristors, GTO, BJT, IGBT, Mosfet, etc.
  • The different AC/DC converters (rectifiers) such as half-wave and full-wave rectifier single-phase circuits in uncontrolled, half, and fully controlled bridges. In addition to the different three-phase rectifier circuits.
  • AC chopper circuits or AC/AC converters in the case of R load, L load, RL parallel, RL series load, and capacitive loads. In addition to the integral cycle control of an AC chopper.
  • DC choppers or DC/DC converters such as the step-down DC chopper with R and R-L-E load, and the step-up DC chopper with R, RL, and RE loads. Moreover, we will also learn about the buck, boost, and buck-boost regulator circuits.
  • Inverter or DC/AC converters including single-phase half-bridge R-load, single-phase half-bridge RL-load, single-phase bridge inverter R-load, single-phase bridge inverter RL-load, and the three-phase inverters. Furthermore, we will also look at the single, multiple, and sinusoidal pulse width modulation.

You will learn simulation using the MATLAB Simulink program:

  • Single-phase half-wave controlled and bridge-controlled rectifiers.
  • Single-phase AC chopper with R and RL load
  • DC-DC converters such as buck, boost, and buck-boost regulators.
  • Single-phase half-bridge, bridge inverters, and three-phase inverters.

Throughout the Electrical Protection course, you will learn:

  • The different components of the electrical protection system
  • Zones of protection
  • The trip circuit of the electrical system
  • The primary and backup protection
  • The fault clearing time

You will also learn about the different types of relays, including:

  • Directional power relays
  • Overcurrent relays
  • Distance relays
  • Plain impedance relays
  • Directional impedance relays
  • Modified impedance-type distance relays
  • Reactance-type distance relays
  • Mho or admittance distance relays

Additionally, you will gain an understanding of:

  • The principle of operation and selection of low-voltage circuit breakers
  • The principle of operation of earth leakage circuit breaker or residual current CB
  • The selection of medium voltage circuit breakers
  • The types of low voltage and high voltage fuses

LogixPro Course

This course is designed to teach you the basics of PLC programming through fun and interactive simulations. With LogixPro, you can simulate various procedures such as moving belts, garage openings and closings, and mixing liquids in a tank.

By taking this course, you will learn ladder programming and PLC with an easy and interactive simulation method.

Bonus Gift:

​You will also get the slides for the Power Electronics and Electrical Protection Course Bundle for those who are interested in them or having them as a revision for themselves

  • More than 250 Pages of Rectifiers and Basics of Power Electronics Slides
  • 45 Pages of AC Choppers Slides
  • 78 Pages of DC Choppers Slides
  • 90 Pages of Inverters Slides
  • 153 Pages of Electrical Protection Slides

If you've been looking for a ONE COURSE BUNDLE with in-depth insight into Power Electronics, Electrical Protection, ETAP, and PLC basics, this is the one for you.

Who this course is for

  1. Anyone who is interested in understanding power electronics.
  2. Anyone who wants to know about different converters and how rectifiers work
  3. Beginner course for electrical engineering students and for those who want to gain knowledge about AC Choppers
  4. Electrical engineers and electrical power engineering students who want to learn about DC choppers
  5. Electrical engineers or electrical power engineers who want to learn more about inverters in power electronics.
  6. Anyone who wants to learn about electrical protection
  7. Anyone who wants to learn about LogixPro simulator that helps in learning about PLC

Testimonials

  1. Very detailed and interesting course ~ Gordon M
  2. Amazing, the principles of operation are well explained ~ Ifidon A
  3. Very lucid and to the point subject disseration. Thank you. Helped me from Mechanical Engg background to understand and converse on Power Electronic topics ~ Chinmoy
  4. Such a great course. It helped me to revise a lot of electronic circuits fundamentals ~ Saad A
  5. Good learning experience with detailed equations, recommend this course for anyone who's want to be a professional in this area ~ Volker K
  6. Good course, I learned all basics and principles of power electronics with simulations ~ Sivasubramanian
  7. Very interesting and a lot of information. I would really recommend this course to anyone ~ Lonwabo G
  8. Very detailed good material from the basics to advanced topics. Recommended ~ Balint G
  9. i enjoyed learning with the instructor. The content is excellent and delivery is great. You can be a veteran from scratch from this course ~ Nancy P
  10. I am loving the course. Big questions are being resolved in these years of study in electronics ~ Alvaro Francisco G

What you'll learn

  1. Understand definition of power electronics
  2. Realize different applications of power electronics
  3. Know different types of converters
  4. Know different categories of power electronic devices
  5. Understand different losses associated with power electronics
  6. Difference between ideal and practical switch
  7. Understand different factors when selecting the power electronic device
  8. Understand how diode works
  9. Understand the diode V-I Characteristics
  10. Learn about different types of diodes
  11. Learn how a thyristor works
  12. Understand thyristor V-I characteristics
  13. Understand different operating states of thyristor
  14. Know the latching and holding current of thyristor
  15. Understand different types of thyristor
  16. Learn how fully controlled switch works
  17. Understand different types of fully controlled switches
  18. Understand why GTO is the king of power electronics
  19. Understand how rectifier works
  20. Learn Different Types of Rectifiers for Single Phase
  21. Learn about Half Wave Rectifier R load for both controlled and uncontrolled
  22. Learn about Half Wave Rectifier R-L load for both controlled and uncontrolled
  23. Learn about Half Wave Rectifier R-L load for both controlled and uncontrolled with Free wheeling Diode
  24. Understand the Usage of Freewheeling Diode
  25. Understand the Principle of Firing angle
  26. Understand the Biphase Rectifier
  27. Understand the fully , half controlled and uncontrolled Bridge Rectifier
  28. Understand the Performance Parameters for Rectifier Circuit
  29. Learn about the Power Factor
  30. Learn about the Firing Circuit UJT
  31. Understand the Protection of Power Electronic devices Against Over-current,Over-Voltage and Transient state.
  32. Understand the Series and Parallel Diodes
  33. Learn the Isolation of Firing Circuit using Pulse Transformer
  34. Learn the Isolation of Firing Circuit using OptoCoupler
  35. Understand the definition of AC chopper
  36. Analyze the AC chopper R load circuit
  37. Learn the AC chopper L load circuit
  38. Analyze the AC chopper R-L series load circuit
  39. Understand the AC chopper R-L parallel load circuit
  40. Analyze the AC chopper Capacitive load circuit
  41. Understand the integral cycle control
  42. Learn how to use AC chopper in transformer tap changing
  43. Learn the applications and disadvantages of AC choppers
  44. Analyze the AC chopper loaded by AC Motor
  45. Definition of DC choppers
  46. Applications of DC choppers
  47. Understand step down DC chopper with R-load.
  48. Generation of duty cycle
  49. Step down DC chopper with R-L-E load
  50. Step up DC chopper R or R-L load
  51. Step up DC chopper with RE load
  52. Buck regulator
  53. Boost regulator
  54. Buck-boost regulator
  55. Definition of inverter
  56. Importance and applications of inverters
  57. Analysis of single phase half bridge R-load
  58. Analysis of single phase half bridge RL-load.
  59. Performance parameters of an inverter
  60. Analysis of single phase bridge R-load
  61. Analysis of single phase bridge RL-load.
  62. Understand the three phase inverters and obtaining the line voltages and phase voltages.
  63. Single pulse width modulation
  64. Multiple pulse width modulation
  65. Industrial inverters
  66. Sinusoidal pulse width modulation
  67. simulation using MATLAB of single-phase half wave controlled rectifier
  68. simulation using MATLAB of single-phase bridge controlled rectifier
  69. simulation using MATLAB of single-phase AC chopper with R and RL load
  70. simulation using MATLAB of DC-DC converter as a buck regulator
  71. simulation using MATLAB of boost regulator
  72. simulation using MATLAB of buck-boost regulator
  73. simulation using MATLAB of single-phase half-bridge inverter
  74. simulation using MATLAB of single-phase bridge inverter
  75. simulation using MATLAB of three Phase Inverter
  76. Overview on the PLC hardware configuration
  77. Overview on types of inputs and outputs in PLC
  78. Advantages of using PLC over classic control
  79. Overview on different PLC programming languages
  80. Discuss the important symbols in PLC
  81. Definition of PLC scan cycle
  82. Usage of markers in PLC
  83. Understand types of timers and counters in PLC and how to use them
  84. Do tasks in batch simulator
  85. Do tasks in silo simulator
  86. Do tasks in door simulator
  87. Do tasks in I/O simulator
  88. Different components of the electrical protection system
  89. Zones of protection of electrical systems
  90. Trip circuit of electrical system
  91. Primary and backup protection
  92. Characteristics of measuring the relay performance
  93. Fault clearing time and time lag in electrical protection
  94. Different types of relays
  95. Directional power relay and its applications
  96. Definition of overcurrent protection
  97. Settings and applications of overcurrent protection
  98. Distance protection in electrical systems
  99. Construction and operation of a distance relay
  100. Plain impedance relay
  101. Operating characteristics and R-X diagram of an impedance relay
  102. Stepped distance protection
  103. Transmission line protection and directional impedance relay
  104. Modified impedance-type distance relay
  105. Reactance-type distance relay
  106. Mho or admittance distance relay
  107. Principle of operation and selection of low voltage circuit breakers
  108. Principle of operation of earth leakage circuit breaker or residual current CB
  109. Selection of medium voltage circuit breakers
  110. Types of low voltage and high voltage fuses
  111. Types of differential protection
  112. Current balance differential protection
  113. Voltage balanced differential protection
  114. Percentage differential current relay

Requirements

  1. Basics of electric circuits
  2. Passion to learn!
Show all

Course Content

16 Sections 249 Lectures 51h 12m total length

Show more
0 Comments

Find Your Place in The World

Uplyrn-Logo

© 2024 Uplyrn PL

Privacy Terms Support

Company

Community

Lecturing

Mentoring